Phone: 0844 800 1750

National Call Rate

Cement Mixer Safety – 7 Top Tips

Cement Mixer Safety – 7 Top Tips

If you walk on to any building site you’re likely to find one of the most common pieces of equipment is a cement mixer, they’re literally everywhere. They come in all kinds of shapes and sizes, from huge towers that mix and then pour large amounts in one go, trucks that rock up with a… Continue Reading

Gantry Hoist Vs. Scaffold Hoist

There are many differences in the gantry hoist and the scaffold hoist. However, there are also many similarities. The gears in the gearmotor are submerged in oil and made of a helical-toothing that will allow the hoist to work at a quieter level. The use of oil as lubricant offers higher protection and lengthens the… Continue Reading

Combi 250VA report

Combi 250VA report

Here at CLM Construction Supplies Ltd we specialise in high end Cutting, Lifting and Mixing equipment. We supply a variety of tile cutters, ranging from 600mm cutting length to 1500mm. The Combi 250VA series with a single phase 110v or 240v electric motor therefore is an ideal instrument to use for all your cutting needs.… Continue Reading

CLM Goes Green

CLM Goes Green

A recurring theme across the past couple of decades has been the need for businesses and technology to be more green and less damaging to the environment. In light of this, we are pleased to announce that we have taken a healthy step in the right direction to help the environment and to help keep… Continue Reading

Electrical Faults: Finding and Repair

Electrical Faults: Finding and Repair

First and foremost, electricity can be extremely dangerous and is not something that should be taken lightly. Below there is listed some of the basic electrical faults that can be rectified by the proper personnel. If there are any further repairs they should only be carried out by qualified and suitable people.   Please do… Continue Reading

Phone: 0844 800 1750

National Call Rate

Although every effort is taken in producing this website, C.L.M. Construction Supplies Ltd., accepts no liability for errors,and reserves the right of the manufacturer to make changes to the models described for the technical or commercial reasons without prior notice. It is prohibited to use descriptions, pictures and technical data for sales activities without prior written permission.

VAT No: 104674037 | Company reg No: 07382625